Mold Remediation Service Universal City
Mold Remediation Company

Mold Remediation Company in UNIVERSAL CITY, California

When mold shows up behind drywall, in an attic, or under a crawl space, you need a Mold Remediation Company in UNIVERSAL CITY, California that finds the moisture source first. Our IICRC-certified crews handle inspection, containment, HEPA filtration, and post-remediation testing for homes and businesses from Universal City Plaza to the Hollywood Hills. Free estimates, same-day response, and a written clearance report when we finish.

Service overview

What a Mold Remediation Company in UNIVERSAL CITY, California does

Mold remediation is the process of finding the moisture feeding a mold colony, containing the affected area, physically removing contaminated materials, and cleaning the air and surfaces so spores do not spread to the rest of your home. We use a thermal imaging camera and moisture meter to trace the water source, then set up containment barriers and a negative air machine before any demolition starts. A boroscope inspection camera lets us check inside wall cavities without tearing the whole room apart. Every job follows the ANSI/IICRC S520 Standard for Mold Remediation, so you get a documented scope, not a guess. In UNIVERSAL CITY, the calls we get most are attic mold from poor ventilation, bathroom mold from humidity that never dries out, and crawl space mold after rain pushes water under a house. If you have been searching for a mold removal contractor in UNIVERSAL CITY who actually tests before and after, we do both. We also handle the moisture repair itself, so the mold does not come back three months later.

! Problems we solve

Black mold growth behind drywall after a slow leak

By the time you see it, the colony has usually been growing for weeks and has spread into the wall cavity and insulation. Airborne spores can trigger allergies and respiratory issues.

Musty odors after cleaning that keep coming back

A musty smell after you have already cleaned usually means mold is still active in a hidden space like a crawl space, attic, or HVAC system. Wiping surfaces does not fix it.

Crawl space mold after winter rain

Water intrusion under a house feeds mold on joists and subfloor. It can weaken structural wood over time and push musty air up into living spaces through gaps in the floor.

Scope of work

What our mold remediation service includes

Every job is scoped to your property after inspection, but here is what a standard remediation includes. Add-ons like HVAC cleaning, duct replacement, or full reconstruction are quoted separately if needed.

  • 01

    Moisture inspection and scope

    A certified inspector uses a thermal imaging camera and moisture meter to map the affected area, identify the water source, and document everything with photos. You get a written scope and flat price before work begins.

  • 02

    Containment and air filtration

    We build containment with 6-mil plastic sheeting and zipper doors, then run a negative air machine and HEPA air scrubbers for the entire job. This keeps spores from spreading into the rest of your home during removal.

  • 03

    Removal and antimicrobial treatment

    Contaminated drywall, insulation, and trim come out and get bagged for disposal. Structural wood gets HEPA vacuumed, treated with antimicrobial solution, and sealed with an encapsulation coating or borate treatment.

  • 04

    Clearance testing and report

    After cleaning and rebuild, we run a spore trap sampler and compare indoor counts to an outdoor baseline. You get a written clearance report you can hand to your insurance company, landlord, or buyer.

Why homeowners call us first

Mold spreads fast when the moisture source is still active. Here is what you get when you hire a certified crew instead of a general handyman.

Request an estimate

Tools and methods we use

Thermal imaging camera

Detects temperature differences behind walls and ceilings to find hidden moisture without demolition. We use it on every inspection to map the full extent of the problem.

Moisture meter

Confirms actual moisture content in drywall, wood, and insulation. Readings tell us what can be dried and what has to be removed.

HEPA air scrubber and negative air machine

Filters airborne spores and keeps containment under negative pressure so mold cannot spread to the rest of your home during removal.

Boroscope inspection camera

Lets us see inside wall cavities, behind baseboards, and inside HVAC ducts without cutting large holes. We use it to confirm scope before demolition.

Local execution

UNIVERSAL CITY sits between the Hollywood Hills and the San Fernando Valley, which means we deal with two very different moisture patterns. Hillside homes in the Hollywood Hills and Studio City get water intrusion from heavy winter rains running down slopes and finding cracks in foundations and retaining walls. Valley-floor homes in North Hollywood, Van Nuys, and Valley Village deal with crawl space mold after rain and attic mold from poor ventilation during hot summers. Older homes built before 1978 often have lead paint, so we work under EPA Lead-Safe Certified Firm protocols when we open walls. We also follow California Department of Public Health (CDPH) guidelines and the ANSI/IICRC S520 Standard for Mold Remediation on every job. If you need a licensed mold remediation company UNIVERSAL CITY homeowners trust, we are on site within 90 minutes for emergencies.

How mold remediation runs in UNIVERSAL CITY

  • • Universal City Plaza
  • • Studio City
  • • Toluca Lake
  • • Hollywood Hills

Before and after

Attic mold removal in Studio City [ Roof sheathing and rafters covered in black mold across roughly 400 square feet of attic. Bathroom exhaust fans were venting directly into the attic, and there was no intake ventilation at the eaves. Musty smell was noticeable in the upstairs hallway. ]
Crawl space mold after winter rain in Toluca Lake [ Water extracted, insulation removed and disposed of, joists HEPA vacuumed and treated with antimicrobial solution. Vapor barrier installed across the entire crawl space floor. Grading corrected outside to divert water away from the foundation. Job took four days. ]
Two cleaners in red uniforms load a vacuum into a white van outdoors.
Response time
Response time

Available 24/7 for mold emergencies in UNIVERSAL CITY

When water is still coming in, we answer

Mold gets worse every day the moisture source is active. We run 24/7 emergency calls and can have a crew on site in UNIVERSAL CITY within 90 minutes for active water intrusion. Our trucks carry dehumidifiers, air movers, HEPA air scrubbers, containment plastic sheeting, and antimicrobial solution so we can start drying and containing on the first visit. Standard inspections get scheduled same-day or next-day. A typical crew is two to three technicians, and larger crawl space or whole-home jobs may run four to six. We answer the phone at any hour, including holidays. If you are dealing with a burst pipe, a roof leak, or a sewage backup, call (833) 929-5837 and we will get someone moving.

90min
Emergency response time

How our mold remediation process works

1

Phone assessment

You call, we ask where you are seeing or smelling mold, how long it has been there, and whether there was a recent leak or flood. We book a same-day or next-day inspection. Most calls in UNIVERSAL CITY get a technician on site within 90 minutes for emergencies.

2

On-site inspection

A certified inspector walks the property with a moisture meter and thermal imaging camera, checks the attic, crawl space, and HVAC system, and takes air samples if needed. You get a written scope with photos, the affected square footage, and a flat price before any work starts.

3

Containment setup

We seal off the work area with containment plastic sheeting and zipper doors, then run a negative air machine and HEPA air scrubbers. This takes two to four hours on a typical bedroom or bathroom job. Your family stays on the other side of the barrier.

Mold remediation pricing in UNIVERSAL CITY

Typical 2026 pricing in UNIVERSAL CITY runs $1,200 to $3,500 for a single room and $4,000 to $12,000 for whole-home or crawl space jobs. Small bathroom mold under 10 square feet can be as low as $650. We give you a flat written price after inspection, before any work starts. No hourly billing, no surprise change orders. If we open a wall and find more than the inspection showed, we stop and get your approval first. Most jobs are also covered by homeowners insurance when the mold traces back to a covered water loss.

01

Affected square footage

Price scales with how much area is contaminated. A 10-square-foot bathroom patch is a very different job than 400 square feet of attic sheathing. We measure during inspection and price by the actual scope.

02

Depth of contamination

Surface mold on tile or paint cleans up fast. Mold that has grown into drywall, insulation, and wood framing requires removal and rebuild, which adds labor and materials. A boroscope inspection camera tells us which we are dealing with before we quote.

03

Moisture source repair

If the leak is a simple pipe drip, repair is quick. If it is a roof leak, foundation crack, or grading problem, that work adds cost. We itemize it separately so you can see exactly what you are paying for.

Frequently asked questions

How much does a mold remediation company cost in UNIVERSAL CITY California?

Typical 2026 pricing in UNIVERSAL CITY runs $1,200 to $3,500 for a single room, and $4,000 to $12,000 for whole-home or crawl space jobs. Small bathroom mold under 10 square feet can be as low as $650. Price depends on affected square footage, how deep the mold has grown into the structure, and whether rebuild work is needed. We give you a flat written price after inspection, before any work starts.

How do I choose a mold removal contractor in UNIVERSAL CITY?

Ask three things: are they IICRC certified, do they test before and after with a spore trap sampler, and will they fix the moisture source. A contractor who skips any of those will leave you with regrowth. Also confirm they carry a California Contractors State License Board (CSLB) license and general liability insurance. We provide all of that in writing with every estimate.

What should a mold remediation company include in UNIVERSAL CITY California?

A complete job includes a moisture inspection with thermal imaging, containment barriers with negative air pressure, HEPA vacuuming and antimicrobial treatment of structural surfaces, removal of contaminated drywall and insulation, and post-remediation clearance testing. It should also include repair of the water source. If a quote skips containment or clearance testing, it is not a full remediation.

Are mold remediation companies licensed in UNIVERSAL CITY?

Yes. In California, mold remediation contractors must hold a California Contractors State License Board (CSLB) license, and technicians should carry IICRC AMRT certification. We also follow California Department of Public Health (CDPH) guidelines and the ANSI/IICRC S520 Standard for Mold Remediation. You can verify any contractor's license number on the CSLB website before hiring.

!

Get a free estimate from a Mold Remediation Company in UNIVERSAL CITY, California

We answer the phone 24/7, give you a flat written price after inspection, and back every job with a written clearance report. IICRC-certified, CSLB-licensed, and fully insured. Call (833) 929-5837 or request an estimate online and we will get a technician to your door today.

Call Now: (833) 929-5837